14A-8 Service Information Guide (All models) Thread locking adhesive agent 1. Using the thread locking adhesive agent Caution Remove grime, fluid, oil, and grease off thoroughly from the bolts, bolt holes, and screw thread section of nuts to which thread locking adhesive agent will be applied. Note Check if the cleaned sections are dry. Caution After tightening, do not apply excessive torque or vibrations for at least an hour until the thread locking adhesive agent hardens. Apply thread locking adhesive agent to the end 1/3 of the screw and tighten at the specified torque. Type Color Loctite 242 Blue Loctite 262 Red Loctite 271 Red