0-2 Introduction (All models) Introduction safety information 9. Be sure to check that there is no fuel leaks when performing maintenance on fuel systems. 1. Repair work safety information 1. Use an engine stand when demounting the engine from the equipment. Be sure not to place the engine directly on the ground or allow the oil pan to come into contact with the ground. 2. When performing a procedure with two or more people, make sure to ensure each other's safety. 3. Do not disconnect the battery cable for 3 minutes after turning OFF the ignition switch. 4. When repairing the electrical system, make sure to disconnect the cable from the negative (-) battery terminal before working.
Keep fire away when removing the battery cover. 10. When handling volatile materials, be extremely careful to not let them catch fire. Also make sure to wipe away any oil that sticks to rubber parts, as it can cause deterioration. 2. Replacement parts and parts number safety information 1. Whenever disassembly is performed, make sure to replace the packing, oil seals, O-rings, crimping lock nuts, bending lock plate, and split pins, etc., with new ones. 2. Since the part numbers indicated in this manual may differ from the supply system and are subject to change, make sure to check the supply system and part numbers in the parts catalog. 5.
Do not leave the engine running for an extended period of time or perform painting in a poorly ventilated working environment. 6. Make sure to use only the special tools if the procedure requires them for the work. Performing the procedure using other tools may cause damage to parts or personal injury. 7. Inspect the tools, instruments, and special tools regularly, and prepare them before working. Do not use tools such as a wrench that has lost its edges, a hammer with frayed edges, or a chipped chisel. 8. When performing work using a device such as a grinder, crane or welder, make sure to pay sufficient attention to the handling precautions.
Wear work clothes and safety equipments in the other operations as well. Find manuals at https://best-manuals.com