Komatsu — 3.4.4 MENU CONTROL

OPERATION 3.4 ELECTRONIC MONITORING AND CONTROL SYSTEM ECS Menu Control with Key Switch (C) and Key Group (D) Setting of Operational Data, menu item Service *SETTINGS* Example: Condition Indication of the Central Lubrication System Starting from the menu level -1-, *SERVICE* see menu control charts I and III. Proceed as follows: 1. Select menu level -1- by pressing ”QUI” key (10) the starting menu item *Truck counter reading:* appears on the display, see chart I. Press key (12) three times, the main group *SERVICE* is dis- played. Press key (10), level -2- with menu item *LAN- GUAGE* appears on the display. 2. Press key (12) three times, the menu point * SETTINGS * appears on the display. 3.

Press key (10), *PTO GEAR-OIL VISCOSITY* in level 3 appears on the display, see chart III (Z25081). 4. Press key (12) two times, the item *CENTRAL LUBRICATION SYSTEM* is displayed. 5. Press key (10), level 4 with the menu item *CONDITION INDICATION* appears on the display. 6. Press key (10) for displaying the present condition of the cen- tral lubrication system in level 5. 7. Press ”RET” key (9) five times for returning to the standard display. 135