OPERATION 3.8 PREHEATING SYSTEMS FOR OIL, COOLANT AND BATTERIES Engine Coolant and Engine Oil Pan Heating Systems Legend for illustration Z25820 -A- Top view of machinery house B-B Sectional view of engine coolant heaters (180° turned to the right) F Coolant flow of front engine 1 R Coolant flow of rear engine 2 (1) LH side member of main frame (2) Front engine 1 (3) Coolant heater unit for front engine 1 (4) Shut-off valve in coolant outlet line (5) Shut-off valve in coolant inlet line (6) Coolant heater unit for rear engine 2 (7) Shut-off valve in coolant outlet line (8) Shut-off valve in coolant inlet line (9) Heater element in engine oil pan (10) Control box for coolant heating (11) Indicator light, coolant heating ON, (12) Switch, coolant heater ON/OFF.
(13) Coolant heating element (14) Water pump with motor To activate the coolant heating, set main switch (1Q1) on the switch board in cab base to ON position. The coolant heating can then be switched on with switch (12) on the control panel. The lamp (11) illuminates with coolant heating ON. Before starting the shovel engines, switch OFF the cool- ant heaters. The coolant heating systems must not be operated while the engines are running. If operated, premature element failure may result. REMARK For more information about the coolant heating system, refer to the operation manual COOLANT HEATING SYSTEM filed in volume 2 binder. 227 CAUTION CAUTION