Komatsu — 3.18.1 OPERATING THE TRANSFER PUMP

OPERATION 3.18 TRANSFER PUMP FOR HYDRAULIC OIL 3.18.1 OPERATING THE TRANSFER PUMP Functions of the Transfer Pump: A - Transfusing the oil from the return oil compartment and leakage oil filter chamber into the main oil reservoir. Neces- sary for filter service and for hydraulic oil change. B - Transfusing oil from the suction oil reservoir into the main oil reservoir. Necessary for evacuation of the suction oil reser- voir, when changing the hydraulic oil. It is advisable to empty the suction oil reservoir partially before repairs on the main hydraulic pumps are carried out. C - Transfusing oil from return oil collector pipe into the main oil reservoir.

Necessary when changing the hydraulic oil and. for servicing the high pressure filters or main control valves. Before operating the transfer pump, lower the attachment onto the ground in a position as shown on the oil level plate at the main oil reservoir. Shut down both engines/motors. Legend for illustration Z 22425A The shut-off valves (1-3) are shown in a 90° ”CW” displaced position.

(1) Shut-off valve for return oil compartment and leakage oil filter chamber (2) Shut-off valve for return oil collector pipe (3) Shut-off valve for suction oil reservoir C - Closed O - Open (4) Operating switch for pump (5) (5) Transfer pump (6) Return oil compartment (7) Main oil reservoir (8) Vent plug, remove before transfusing oil from return oil compartment and leakage oil fil- ter chamber into the main reservoir (9) Return oil collector pipe (10) Hand wheel of the main shut-off valve between main- and suction oil reservoir (11) Vent plug on top of the main oil reservoir, remove before transfusing oil from return oil compartment and leakage oil filter chamber into the main reservoir (12) Leakage oil filter (13) Return oil filters (14) Breather filters During normal operation the valves (1, 2 and 3) must be in closed position ”C”.

279 CAUTION CAUTION