Komatsu — 3.19.3 RECEIVER PANEL WITH MONITOR BOX

OPERATION 3.19 CENTRAL REFILLING SYSTEM Legend for illustration Z22775 291 17 Engine oil evacuation and filling adapters of the reserve tanks for Front engine (Fr.) and Rear engine (Rr.). Observe the corresponding indicator lamp (9) and (10). 18 (Fr.) Front engine, (Rr.) Rear engine. Radiator coolant evacuation and filling adapter. Monitor coolant level at radiator filler neck. NOTICE The two-loop type cooling system of each engine is equipped with two radiators. One radiator for the engine crankcase and cylinder heads and one radia- tor for the low temperature aftercooler (LTA) system.

Each radiator is equipped with a shut off cock in the draining - filling hose line just below the radiators. For evacuation and filling of the coolant it is neces- sary to open the four shut-off cocks in the front and rear engine radiators hose lines. Refer to the engine Operation and Maintenance Man- ual in volume 2 binder for the maintenance instruc- tions of the cooling system. CAUTION Be sure to close all four shut-off cocks on the bot- tom side of the radiators as soon as the mainte- nance of the cooling system is finished. 19 Adapter for evacuation and filling of the main hydraulic oil reservoir.

REMARK Refer to section TRANSFER PUMP FOR HYDRAU- LIC OIL on page 278 for evacuation procedure of suc- tion oil reservoir, return oil compartment and back- pressure valve pipe. After the oil is completely evacuated,open the shut-off valve between main oil reservoir and suction oil reser- voir. Fill the hydraulic reservoir and observe indicator lamp (11). CAUTION CAUTION