OPERATION 3.19 CENTRAL REFILLING SYSTEM 3.19.4 REFILLABLE GREASE CONTAINERS OF THE AUTOMATIC LUBRICATION SYSTEMS Legend for illustration Z25825 (1) Grease filter for central lubrication system. Before filling the grease container make sure the filter is not obstructed. Service the filter element according to the instructions in the mainte- nance section 4. (2) Grease container of the central lubrication system (3) Hydraulically driven grease pump (4) Grease pressure gauge (5) In-line grease filter (6) Quick disconnect coupling (7) Grease filter for swing circle pinion lubrication system. Before filling the grease container make sure the filter is not obstructed.
Service the filter element according to the instructions in the maintenance section 4. (8) Grease container of the swing circle pinion lubrication system (9) Hydraulically driven grease pump (10) Grease pressure gauge (11) In-line grease filter (12) Quick disconnect coupling (13) Breather filters (14) Grease level gauge for manual checking of the grease level Refill the respective grease container, when the Fault message ”Central lube system grease container on reserve” or ”Swing circle lube system grease container on reserve” is being displayed on the ECS monitor. The central lubrication system and the swing circle pinion lubrication system have to be filled with different types of grease.
Select the correct greases according to the Lubricant Charts in Service Literature Binder volume 2. As soon as a grease container is filled up to the correct level the corresponding indicator lamp (7 or 8), illust. (Z22775) lights up and an acoustic signal sounds. In order to ensure proper opera- tion of the lubrication systems carry out the periodic maintenance of the grease filters (1 and 7), illust. (Z25825) according to main- tenance section 4. Periodic inspection of the grease pumps (3 and 9) at least once a year is advisable. After finishing the refilling operation, cover the adapters with the protection caps provided.
Carry out a test-run of the lubrication systems by actuating the switches on the instrument panel. 295 CAUTION CAUTION