MAINTENANCE 4.6 LUBRICATION AND MAINTENANCE SCHEDULE (1) Perform maintenance according to separate Engine Operation an Maintenance Manual filed in volume 2 binder. (2) Perform inspections according to the separate Manual ”FIRE SUPPRESSION SYSTEM” filed in volume 2 binder. (3) Perform inspections according to the separate Manual ”OPERATING INSTRUCTIONS AC” filed in volume 2 binder. Carry out initial service according to item 4.6.1. 317 Service Intervals Service Point Service See Every 1000 operating hours or every 6 months High strength bolt connections Check for correct tightening torque and security page 407 Hydraulic system - Replace return and leakage oil filter elements.
- Clean or replace pressure filter elements. - Clean or replace high pressure filter elements. - Replace breather filter ele- ments. - Clean filler screen. - Drain sediments.
page 449 PTO’s (Pump distributor gears) Swing gears and Travel gears Oil sample analysis page 461 Signal horn compressor Clean and lubricate page 463 Hydraulic track tensioning system Check pressure accumulators page 465 Water filter for hand wash sink in Operator’s cab Replace carbon filter cartridge page 467 Hydraulic oil cooler doors and machinery house doors Inspect and lubricate door hinges page 469 Engine Maintenance (1) Fire suppression system Maintenance (2) Air conditioning Inspect the complete system (3) CAUTION CAUTION