MAINTENANCE 4.8 EVERY 10 OPERATING HOURS OR DAILY 4.8.1 WALK - AROUND INSPECTION Before carry out any maintenance on this machine, make sure the access ladder, handrails and walkways are properly installed and in good condition. Keep the ladder, steps, hand- rails and walkways free of mud, oil and grease. Always use the ladder, handrails and steps to get on or off the machine. Jumping on or off the machine can cause an injury. Legend for illustration Z25226 (1) Working attachment. Check overall condition. Inspect for loose or missing securing parts. (2) Hydraulic cylinders. Check cylinders, hydraulic hoses and fittings for leakage and damage. (3) Check bucket teeth for proper mounting.
Inspect for loose or missing securing parts. Check condition of the loader bucket. Both loader bucket versions, bottom dump bucket and backhoe bucket are equipped with wear protection packages as specified in the contract. These wear packages protect the base body of the bucket from premature wear and tear. Therefore it is important to check the condition of the wear protection elements regularly. Worn or damaged protection elements should be replaced at an early stage in order to prevent dam- age to the base body of the bucket. In case the bucket base is already weakened, recon- ditioning measures will be necessary. Contact your Komatsu dealer for support.
(4) Check guide wheels for leakage. (5) Check carrier rollers for leakage. (6) Check track rollers for leakage. (7) Check final drives and hydraulic motors for leakage. Check hydraulic hoses, hose lines and fittings for leakage and damage. (8) Check swing circle toothing for adequate lubrication. (9) Check swing gears and hydraulic motors for leak- age. Check hydraulic hoses, hose lines and fittings for leakage and damage. (10) Check condition, fastening and security of access ladder. 343 WARNING WARNING