Komatsu — 4.8.4 TRACK GROUPS - CLEAN

MAINTENANCE 4.8 EVERY 10 OPERATING HOURS OR DAILY 4.8.3 RADIATORS - CHECK COOLANT LEVEL Legend for illustration Z 22864 (6) Coolant expansion tanks of front and rear engine radiators (7) Coolant level sight gauge on front and rear coolant expansion tanks (8) Radiator pressure caps (9) Pressure relief button DO NOT remove the radiator pressure cap (8), illust. Z22864 from a hot engine. Wait until the temperature is below 50°C before removing the pressure cap (8). Failure to do so can result in personal injury from heated coolant spray or steam. Press Button (9) to allow the pressure to escape, then con- tinue to turn until cap is free to be removed.

The coolant level should be in the upper field of the sight gauges (7). If necessary add coolant. REMARK Refer to the Engine Operation and Maintenance Manual for the correct coolant composition. 4.8.4 TRACK GROUPS - CLEAN See (10), illustration Z 22864. Clean track groups especially during the cold season. 355 WARNING WARNING