Komatsu — 4.12.1 HIGH STRENGTH BOLT CONNECTIONS - CHECK TORQUE LOAD

MAINTENANCE 4.12 EVERY 1000 OPERATING HOURS OR EVERY 6 MONTH High-Strength Bolt Connections (continued) Check tightening torque of the counterweight mounting bolts, illust. Z25752 * SW = Wrench size Re-tighten mounting bolts to their correct torque and replace missing or damaged bolts. The chambers of the counterweight are filled with a mixture of concrete, granulated ore and steel pellets. This mixture can create explosive gases which will accumulate in the chambers of the counterweight. Before any welding, flame- cutting, grinding or drilling procedures are carried out on the counterweight it is vital to expel these gases from the coun- terweight chambers.

Failure to properly expel the gases from the counterweight chambers can result in an explosion with serious personal injury or death. Follow the instructions given in PARTS & SERVICE NEWS No. AH04518 for expelling the gases from the counterweight chambers. 435 Reference No.: Bolt size mm Grade SW * mm Tightening torque Nm Qty. (1) Counterweight 1 (2) Mounting bolts M48 10.9 75 7500 16 (3) Fastening points for horizontal transport (4) Fastening points for raising up the counter weight (5) Fastening points for vertical transport A1 - A5 Fastening points WARNING WARNING