MAINTENANCE 4.12 EVERY 1000 OPERATING HOURS OR EVERY 6 MONTH High-Strength Bolt Connections (continued) Cable Drum for Excavators with Electric Prime Mover Check condition anf fastening of parts (01 - 06) and (10, 30 and 40), illust. Z 20620 Legend for illust.
Z 20620 (01) Junction box (02) Brake motor (03) Drum body (04) Cable guide rocker arm (05) Sliding frame (06) Drive chain guard (10) Cable drum carrier frame (11) Mounting bolts frame (10) to undercarriage center section (14) Mounting bolts junction box (01) to frame (10) (19) Mounting bolts drum (03) to frame (10) (20) Lock nut (21) Adjusting screw for drive chain tension (30) Limit switch, cable end (40) Actuator lever for limit switch (30) * SW Wrench size Re-tighten mounting bolts to their correct torque and replace missing or damaged bolts. For more information concerning cable drum maintenance refer to the separate booklet CABLE DRUM in volume 2 binder. 445 Reference No.:
Bolt size mm Grade SW * mm Tightening torque Nm Qty. (11) M24 10.9 36 880 40 (14) M20 10.9 30 510 4 (19) M20 10.9 30 510 4