OPERATION 3.2 CONSTRUCTION OF THE SHOVEL Engine Oil Management System The engine oil management system of each engine combines the automatic engine oil supply system Reserve and the oil burning system Centinel in connection with the Eliminator oil filtration system. Reserve System Oil Flow Schematic, illust.
Z25751 (1) Front engine -1- viewed from PTO gear side (2) Rear engine -2- viewed from PTO gear side (3) Oil filters for the engine oil reserve system (4) Suction line from reserve tank (5) Suction line from oil filters to pumping unit (9) (6) Supply line from pumping unit to engine oil pan (7) Withdrawal oil line from engine oil pan to pumping unit (8) Oil feed-back line to reserve tank (9) Pumping unit, located on the cross member (12) of the power frame just below the fire wall. The pump unit works automatically as soon as the engine speed is above 300 RPM. The pump unit consists of a pumping element for feeding oil from tank (10) into the engine oil pan.
The second pumping element withdraws oil from the engine oil pan and feeds it back into the reserve tank when the oil level in the oil pan exceeds the maximum running oil level. This function maintains a favorable engine oil level. The combined operation of the pumping elements provides constant circulation of oil between the engine sump and reserve tank (10) increasing the total volume of working oil. This maintains the oil quality over longer periods. Oil drawn off by the Centinel burn system is also replaced through the supply system Reserve. (10) Reserve oil tank. The reserve oil tank for the front engine -1- is an inte- grated part of the RH main frame side member.
The reserve oil tank for the rear engine -2- is an integrated part of the LH main frame side member. (11) Drain plug (12) Power frame cross member (13) Side member of main frame (14) Oil level sight gauge (15) Connector for refilling line from swing down service arm (16) Reserve tank breather filter (17) Eliminator oil filter, refer to Service Bulletin ELIMINATOR FILTER for more information. The Bulletin is filed in volume 2 binder. (18) Centrifuge 73