Komatsu — 3.3.3 OPERATOR’S CONSOLE

OPERATION 3.3 OPERATOR’S CAB - CONTROLS Switch Board (continued) Legend for illust. Z25814 (28) Strike button, emergency shut down of both engines and pilot control system cut out. In case of emergency push in this button to stop the Die- sel engines and to cut out the pilot control circuit. DO NOT use for normal stopping procedure. For releasing the switch, turn and pull-up the strike button. (29) Switch, RH and LH mirror adjustment (30) Control unit for air conditioning and heating, see page 198 for more information. (31) Interface panel for download of ECS data and for diagnostics of electronic pump control system and engine electronic control modules, see page 89 for more information.

(32) Cigarette lighter (33) Plug sockets 24V DC (34) Radio (35) Control module for the auxiliary cab heater HYDRONIC 10, special equipment. If so equipped, see page 201 for more information. (36) High level alarm: Automatic engine shutdown . The high level alarm (36) will sound approximately 10 seconds before an automatic engine shutdown occurs and will continue to sound during the 10 sec- ond period. At the same time a blinking message *SHUTDOWN* will be displayed on the ECS screen. Use the time period to move the machine to a safe place and lower the attachment to the ground. Inform service about the shutdown condition. 87 WARNING WARNING WARNING WARNING