Komatsu — 3.3.5 CONTROL MODULE FOR AUXILIARY CAB HEATER

OPERATION 3.3 OPERATOR’S CAB - CONTROLS 3.3.5 CONTROL MODULE FOR AUXILIARY CAB HEATER Special Equipment Legend for illust. Z25815 (5) Control module for the engine independent auxiliary cab heater Hydronic 10, see page 201 for location of the heater unit. The module (5) is used for switching ON and OFF the auxiliary cab heater during operation of the shovel with the Diesel engines running, and for pre- selection of heater start times and duration of heat- ing periods. For detailed setting instructions of the control module refer to the separate operating instruction sheet in volume 2 binder.

(6) Button for actual time indication (7) Button for preselection of heating time (8) Button for heating indication (9) Button for settings backwards (10) Button for settings forward (11) Not used (12) Display shows the operating condition of the auxil- iary cab heater 91