. OPERATION DETAILED CONTROLS AND GAUGES Other Functions Display Failure mode E-- No failure E11 Disconnection in RECIRC sensor E12 Short circuit in RECIRC sensor E15 Disconnection in water temperature sensor E16 Short circuit in water temperature sensor E18 Short circuit in sunlight sensor E43 Abnormality in vent damper E44 Abnormality in air mix damper E45 Abnormality in RECIRC/FRESH damper When more than one failure is detected, press the " " or " " portion of temperature setting switch (3) to display the failures in turn. After completing the troubleshooting, press OFF switch (1) again to return to the normal display.
If any problem is detected by the self-diagnostic function, contact your Komatsu distributot perform inspection and repair. 3 - 46 Self-diagnostic Functi It is possible t o perfor m troubleshooting of various s ensor s and equipment used on the a ir conditioner. 1. Turn t he starting s witch key t o the ON (B ) position. 2. Press OFF switch (1). The temperature settin displa y o n cryst portion operation 3. If the "∨" and "∧" parts of mperatur etting switch (3) are kept pressed at t he same t ime f or a east 3 seconds, the troubleshooting m ode is displayed on t he liquid crystal display portio display a nd failure mode>