. OPERATION MACHINE OPERATIONS AND CONTROLS WORKING MODE Working Mode and purpose, thereby NOTICE Do not use the heavy-duty operation mode for breaker operations. If breaker operations are carried out in the heavy-duty operation mode, there is a hazard that the hydraulic equipment may be damaged or broken. One-Touch Power Max. Switch The one-touch power max. Switch can be used during operations to increase the power. Make effective use of this function whenever necessary in combination with the working mode. Press the left knob switch and keep it pressed. The power is increased as long as the switch is being pressed. However, the increased power is automatically canceled after 8.5 seconds.
This function does not work if the working mode is B mode. 3 - 93 The mod e select used to enabling work to be performed efficiently Make effective us e of each mode a s follows. When th e starting switch is turned t o the ON position, the working mode is set to A mode (di Use the working mode switch to set the mode to the most mode to match th e type of work the mode Working mode Applicable operations A mode Normal digging, loading operations (Operations with emphasis on productivity) E mode Normal digging, loading operations B mode Breaker operations