. OPERATION MACHINE OPERATIONS AND CONTROLS GENERAL OPERATION INFORMATION High Speed Travel idler in the forward direction. Permissible Water Depth NOTICE 3 - 96 Traveling Traveling over boulders, tr ee stumps, or other obstacles wil l cause a big shock to the chassis (and in particular to the tracks), a nd this will cause damage to the m achine. For this reason, always r emove any obstacles or travel ar ound them, or take other steps to avoid les as far as possible.
traveling over an obstacle, reduce the traveling over such obstac If there is no way to avoid travel speed, keep the wor k equipment close to the ground, and try to travel so that the center of the track passes over the ob stacle. On uneven roadbeds such as rock beds or uneven roads wi th large rocks, travel at Lo speed. When driving the machine out of water, if the angle of the machine exceeds 15°, the rear of the upper stru cture will go under water, and wate r will be thrown up by the cooling fan. Be extremely careful when dr Do not drive the machine i n water deeper than the center of carrier roller (1).
Supply grease to the parts which have been under water fo r a long time until the used grease is projected out of the bearings ( around the bucket pin, in particula r).