Komatsu — TRAVELING ON SLOPES

. OPERATION MACHINE OPERATIONS AND CONTROLS TRAVELING ON SLOPES WARNING Turning or operating the work equipment when working on slopes may cause the machine to lose it balance and turn over, so avoid such 3 - 98 operations. Itis particularly dangerous to swin If such operations have to be perfo g downhill when the bucket is loaded. rmed, pile soil to make a platform (A) on the sl ope so the machine is ke pt horizontal during operatio Do not t ravel up or down steep may turn over. machine When tra veling, raise the bucket a pprox. 20 to 30 cm (8 to 12 in) f rom the ground. Do not tr Never tu avel downhill in reverse. rn on slopes or travel across slopes.

Always g longer, b Always o o down to a flat place to ut it will ensure safety. perate or travel in such a perform these operations. It may be way that it is possible to stop safely at any ti me if the machine slips or becomes unstable. When tra veling uphill, if the shoes slip or it is impossible to trav el uphill using on ly the force of the tracks, do not use the pulling force of the arm to help t he machine travel uphill. There is danger that the mach ine may tu rn ove r. 1. When traveling down steep h ills, use the travel lever a nd fuel c a p e ontro l dial to keep the travel speed low. When travelin g down stee p hill of more than 15 e shown in the diagr speed.

°, set the work equipment ostur ngine 2. When traveling up a steep h ill of more than 15°, set th e work e quipment to the posture sho wn in the diagram on the right.