Komatsu — AFTER STORAGE

. OPERATION LONG TERM STORAGE LONG TERM STORAGE DURING STORAGE WARNING 3 - 127 BEFORE STORAGE NOTICE To protect the hydraulic cylinder piston equipment in the posture shown at rig (This prevents rust from developing on When putting the machine in stora ge for a long time (more than one month), d o as follows. Clean and wash all parts, then s tore the machine indoors. If the machine ha s to be stored o utdoors, select level ground and cover the machine with canvas. is prevents moisture from collecting. fore storage. hydraulic cylinder piston rod with grease. Completely fill the fuel tank.

Th Lubricate and change the oil be Coat the exposed portion of the Disconnect the negative termina ls of the battery and cover it or remove it from the machine an d store it separately. Lock each control lever and ped al with the lock lever and pedal lock. Set the stop valve to the LOCK p osition on machines ready for attachments. Install the blind plugs to t he elbows. Set the selector valve on the ma chines which can install attachments to the "Where no atta chment is mounted" position. If it is necessary to perform the rust-pr evention operation while the machine is indoors, o pen the doors a nd window s to improve ventilation and prevent gas poisoning.

During storage, operate and mo ve the machine for a short distance once a m onth so that a n ew film of oil will coat moving parts. At the same time , also charge the battery. air conditioner, run the air conditioner. For machines equipped with an AFTER STORAGE NOTICE If t he machine has been stored withou t carrying out the monthly rust-prevention opera tion, consult yo ur Komats u distributor before using it. When using the machine after long -term storage, do as follows before using it. Wipe off the grease from the hy Add oil and grease at all lubrica When the machine is stored for a long period, moisture in the air will mix with th e oil.

Check th e oil befor e and after starting the engine. If there is w ater in the oil, change all the oil.