Komatsu — LUBRICANTS, FUEL AND COOLANT SPECIFICATIONS

. MAINTENANCE LUBRICANTS, FUEL AND COOLANT SPECIFICATIONS MAINTENANCE LUBRICANTS, FUEL AND COOLANT SPECIFICATIONS Fuel tank Specified capacity 650 171.73 Refill capacity - - REMARK When fuel sulphur content is less than 0.5%, change oil in the oil pan according to the periodic maintenance hours described in this manual. Change oil according to the following table if fuel sulfur content is above 0.5%. When starting the engine with an atmospheric temperature of lower than 0 ° C (32 ° F), be sure to use engine oil of SAE10W, SAE10W-30 and SAE15W-40, even though the atmospheric temperature goes up to 10 ° C (50 ° F) more or less during the day.

Use API classification CD as engine oil and if API classification CC, reduce the engine oil change interval to half. There is no problem if single grade oil is mixed with multigrade oil (SAE10W-30, 15W-40), but be sure to add single grade oil that matches the temperature range in the table. We recommend Komatsu genuine oil which has been specifically formulated and approved for use in engine and hydraulic work equipment applications. Specified capacity: Total amount of oil including oil for components and oil in piping. Refill capacity: Amount of oil needed to refill system during normal inspection and maintenance. ASTM: American Society of Testing and Material SAE:

Society of Automotive Engineers API: American Petroleum Institute 4 - 10 Engine oil pan Swing machinery case Final drive case (Each) Damper case Hydraulic oil system Cooling system Liter 42 20 12 1.07 472 36 US gal 11.10 5.28 3.17 0.28 124.70 9.51 Liter 38 20 12 1.07 248 36 US gal 10.04 5.28 3.17 0.28 65.2 9.51 Fuel sulfur content Engine oil change interval 0.5 to 1.0% 1/2 of regular interval Above 1.0% 1/4 of regular interval