. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN HYDRAULIC TANK WARNING cause burns. Wait for the NOTICE machine is equipped with a hydraulic faster than operations. For details, see "MAINTENANCE (PAGE 4-17)" when carrying out maintenance. 4 - 78 EVERY 5000 HOURS MAINTENANC Maintenance for every 250, 5 00 an d 1000 ho urs servic e shou ld be carried out at th e same time. T mediately temperature to go down befor e starting the wo When removing the oil filler c ap, tur n it slowly to release the inter nal pressu re, then remove it. If the draulic oil will deteriorate mu NTERVAL YDRAULIC uring normal bucket Refill capacit y:
248 liters (6 5.52 US gal) t so that drain plugs Prepare a ha ndle (for the s ocket wrench). 1. 2. 3. 4. . Swing the u pper structur e 45° to the lef that lugs (P1), (P2) u nder the tank and t he bottom of the p ump su ction tube are in t he middle be tween the left a nd right tr acks. . Retract the a rm and buck et cylinders, the n lower th e boom and put the teeth in contact w ith the ground. nd stop the engine. plugs (P1) and (P2). . Set the lock lever to the L OCK position a nd stop t he engi . Remove the 2 undercove rs under drain plugs (P1 ) and (P