Komatsu — LOCATIONS

. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT Lock Pin NOTICE Breaker Circuit Additional Oil Filter This filter (5) prevents deterioration of the hydraulic oil when using a breaker. Oil only flows when B mode is selected on the monitor. NOTICE filter in the return circuit on machines 6 - 5 This pin (4) locks the co ntrol peda Position (a) : Locked Position (b) : Only front of pedal c an be operated to ful l positio (rear is loc Position (c):

Both front a nd rear o f peda l can be operated t full position When usi ng a breake r, select B mode on the m onitor and set the o position (b sing the atta When us ing a Crash er, select A or E mode o n the monitor set the lo ck pin to po When using a breaker, if th e lock pin is set to position ( c) and the r ear portion (B) of the pedal is depressed, it will cause defective operation or breakage of th e breaker, so always set th e lock pin t o position (b) when u Always insta equipped wit ll an additio h a hydraulic