Komatsu — ATTACHMENT COMBINATIONS

. ATTACHMENTS AND OPTIONS ATTACHMENT GUIDE PC450, 450LC This is the combination table for attachments installed to the standard HD arm. The items marked * are for when the side cover is installed. NOTICE When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage. Operate the boom carefully. 6 - 16 The items marked * are for when the side cover is installed.

Bucket Capacity m3 (cu.yd) Opening width mm (ft in) Use Standard boom 7,000 mm (22' 12") Standard arm 3.4 m (11' 2") Short arm 2.9 m (9' 6") Ultra short arm 2.4 m (7' 10") Semi-long arm 4.0 m (13' 1") Long arm 7.8 m (25' 7") 1.3 (1.7) 1,120 (3' 8") Narrow width excavation { { { { { *Narrow 1.6 (2.1) 1,270 (4' 2") Narrow width excavation { { { ∆ ∆ ± *Standard 1.9 (2.5) 1,475 (4' 10") General excavation { { { ± ± ± *Light-duty work 2.1 (2.7) 1,565 (5' 2") Loading ∆ ∆ ∆ ± ± ± Light-duty work 2.2 (2.9) 1,715 (5' 8") Loading ∆ ∆ ∆ ± ± ± *Rock 1.9 (2.5) 1,440 (4' 9") Excavating soft rock { { { ± ± { *Rock 2.1 (2.7) 1,560 (5' 1") Excavating soft rock ∆ ∆ ∆ ± ± ∆ Ripper 1.1 (1.4) 1,250 (4' 1") Excavating rock { { { ± ± { Single-shank ripper - - Ripping rock { { { ± ± { Name Capacity m3 (cu.yd) Opening width mm (ft in) Use Standard arm 3.4m (11 ft 2 in) *Rock (standard) bucket 1.9 (2.5) 1,420 (4' 8") General excavation { *Rock (large) bucket 2.1 (2.7) 1,560 (5' 1") For large-scale excavation { Ripper bucket 1.1 (1.4) 1,250 (4' 1") Excavating rock { Single-shank ripper - - Ripping rock {