. MULTI-MONITOR SPECIFICATION DETAILED CONTROLS AND GAUGES only when it is possible to install an 7 - 26 Select Switc Thi s switch ( 7) is used as a selector switch when settin g th e oil f low for each working mode (A, When workin g mode is A or E and the normal screen on the monitor (1) Press select switch (7) on the monitor displa y changes to the fl ow setting scre en shown in the diagram on the right. (2) Press up switch (9) or d own switch (10 ) to adjus t to the desired f low. segment on the scale is approx. 30 liters/min. Each segmen t on the sc ale is approx. 30 liters/min. (3) After completing the flow setting, press input confirmation (11).
onitor display will return to the normal screen. onfirmation switch (11). The m onitor d isplay will return to the n ormal screen REMARK can be adjusted Th e flow attachment. (if e quipped) When workin g mode is B mode and the normal screen on the monitor (1) Press select switch (7) on the monitor displa y changes to the fl ow setting scre en shown in the diagram on the right. (2) Press up switch (9) or d own switch (10 ) to adjus t to the desired f low. completing the flow setting, press input confirmation (11). (3) After switch (11). (4) With t he operation in St ep (3), the flow setting s creen c hanges t r o the fine flo w adjustme nt screen sho wn in the d iagra m on the ight.
(5) Press up switch (9) or d own switch (10 ) to adjus t to the desired f low. segment on the scale is approx. 10 liters/min. Each segmen t on the sc ale is approx. 10 liters/min. (6) After completing the flow setting, press input confirmation (11). onitor display will return to the normal screen. onfirmation switch (11). The m onitor d isplay will return to the n ormal screen