Komatsu — STARTING ENGINE

. MULTI-MONITOR SPECIFICATION MACHINE OPERATIONS AND CONTROLS STARTING ENGINE Normal Starting WARNING change it to the 7 - 33 Sit down in the operator's seat before starting the eng Do not atte mpt to start the engi ne by short-circuiting t he engine starting circuit. Such an act ma y cause serious bodily i njury or fire. Check that there are no person s or obstacles in the su rrounding area, then sound the horn and Exhaust ga s is toxic. When sta rting the engine in conf ined spaces, be particularly careful to ens NOTICE Before star ting the engine, check that the fuel control dial is at the low idle (MIN) p If the fuel c suddenly a osition.

ontrol dial is at the FULL position, the engine will accelerate nd cause damage to the engine parts. Do not cran If the engi again. k the starting motor continuously for more than 20 seconds. ne does not start, wait for at least 2 minutes before trying 1. Check th e lock lever (1) is in the LOCK position (L). If the lock n the FREE positi on (F), the engine do 2. Set fuel control dial (2) at t he low idle (MIN) po If it is at low idle the high idle (MA X) position, always c (MIN) position.