Komatsu — ATTACHMENT OPERATIONS

. MULTI-MONITOR SPECIFICATION MACHINE READY FOR ATTACHMENT MACHINE READY FOR ATTACHMENT ATTACHMENT OPERATIONS 7 - 59 When Using Breaker set to B mode, set the lock pin to FREE With the working mode position (a) for the front o nly, and depress the fro nt of the pedal to actuate the breaker. e to B mode. 1. Set the working mod 2. When monitor select to screen (A), so sele that is installed (300 US gal)/min., 140 lit confirmation switch ( 3. The screen changes needed, press UP s bar graph showing appropriate oil flow, t One segment on approx. 20 liter (5 If no fine adjus confirmation switc Even when the sta by the above ope engine is started 1. Set the working mod 2.

When monitor select switch (1) is pressed, the screen c hanges to screen (A), so sele ct the appropriate oil flo w for the breaker that is installed (300 liter (79.26 US gal)/min ., 220 lite r (58.12 US gal)/min., 140 lit er (36.99 US gal)/min.), then press input 2). confirmation switch ( 3. The screen changes to screen (B), so if any f ine adjus tment is needed, press UP s witch (3) or DOWN switc h (4) to m ove the bar graph showing the oil flow up or down, sel ect the appropriate oil flow, t One segment on hen press input confirmation switch (2). the scale can change the oil flow by .28 US gal)/min. tment is needed, simply press input h (2).

rting switch is turned OF ration remains as the se F, the oil t value w flow set hen the next. Precautions when us ing op valve is at the FREE position. rking mode is B mode. Check that the st op valve is at the FREE Check that the wo rking mode is B mode. For details of the p (PAGE 6-7)". ath of the oil, see "HYDRAULIC C IRCUIT g whether it is necessary to install an the attachment circuit, contact the facturer and then decide. When considerin accumulator for attachment manu the attachment circu facturer and then decide For other precauti ons when handling the b reaker, fo llow the instruction manua the breaker corre l from the breaker manufacturer and use ctly.