Komatsu — MONITORING SYSTEM

. OPERATION DETAILED CONTROLS AND GAUGES or canceled. Travel Speed Switch WARNING Wiper Switch This switch (4) actuates the front window wiper. ON lights up: The wiper works continuously. INT lights up: The wiper works intermittently. OFF: The wiper stops. 3 - 15 Auto-deceleration Swit This switch (2) acts t automatically lowers the engine spee d and reduces fuel consumption when the control levers are at ne utral. s up: Auto-deceleration is actuated out: Auto-deceleration is canceled Auto-deceleration light s up: Auto-deceleration is actuate Auto-deceleration goes out:

Auto-deceleration is cancel Each time the switch is pressed, the auto-deceleration is actuated When loading or unloa ding from a trailer, always travel at lo w speed (with travel speed selecto r switch ( 3) at the Lo p osition). Never operate travel sp eed selector switch (3) while loading or unloading. If the travel speed is s witched between Hi and Lo when the machin e is traveling, th e machine may deviate to one sid e, even when traveling in a str Stop the machine befo aight line. re switching the travel speed. This switch (3) is use levels (high and low). d to switch the travel speed between two d d rted, the speed is automatically set to Lo. Lo lights up: Low spee Hi lights up:

High spee When the engine is sta When traveling in Hi, if more travel power is needed, su ch as on soft ground or traveli ng uphill, the transmission automatically switches to low speed ( Lo), there is no need to operate th e switch. The monitor display sta ys at Hi.