. OPERATION DETAILED CONTROLS AND GAUGES Swing Lock Switch WARNING 3 - 18 Fuel Control Dial This d ial (2) adjusts the engine spe (a) Low idle (MIN): Turned fully to t (b) Full speed (MAX): Turned fully REMA Even if the fuel control dial is turne d several notches up from low idling position (a) or down from ful l speed position (b), there is a range where the engine speed doe s not change, but this is not an abnormality. Cigarette Lighter rettes. This s witch (3) is used to light ciga To us e, push the lighter in. After a f ew seconds it will spring back. Pull o ut the lighter and light your ci garette. the socket is available as a g lamp. .
By re moving the cigarette lighter, powe r source for the yellow flashin Max. current is 85 W (24V x 3.5 A) Wh en not using the swing operation, e.g. when traveling, put the swing k switch to the OFF position. On slopes, even when the swing loc k switch is at the ON position, the ght of the work equipment may c ause the upper structure to swing e swing control lever is operated Switc h (4) is used to lock the uppe r structure so it will not swing. (a) ON position: The swing lock is always applied, and the upper swing even if the swing is ondition, the swing lock lamp applied only when the swing structure will not operated. In this c lights up. (b) OFF position:
The swing lock is control lever is released when op The swing lock i putting the swin position. in the neutral position, and erating the swing control lever. s actuated in 7 seconds after g control lever in the neutral