. OPERATION DETAILED CONTROLS AND GAUGES Travel Levers WARNING This lever (2) is used to change the direction of travel between forward and reverse. ( ) shows the pedal operation. (a) FORWARD: The lever is pushed forward (The pedal is angled forward) (b) REVERSE: The lever is pulled back (The pedal is angled back) N (Neutral): The machine stops Work Equipment Control Lever Left work equipment control lever (3) is used to operate the arm and upper structure. Arm operation (a) Arm OUT (b) Arm IN Swing operation (c) Swing to right (d) Swing to left 3 - 23 Do not rest your foot o n the pedal during operations. I f the p edal is depressed by mistake, t serious accident.
Be ex travel or steering operati rest your foot on it. he machine may suddenly mov e and c ause a tremely careful when operating the pe dal for ons. When you are not using the pedal, do not If the track frame is facin g the rear, the direction of travel o peratio ns will be reversed when the tra forward when operated forward; the left and righ vel lever is operated. (The machine wil l travel in reverse, and in reverse w hen operated .) erated t directions will also be reversed When operating the trav el levers, check if the track fram e is faci ng the front or the rear.
(If the s the front.) procket is at the rear, the track f rame is facing REMARK travel alarm (If equipped) Machines equipped with If the lever is shifted to t he forward or reverse position from the neutral position, the alarm so unds to warn that the machine is starting to m ove. N (Neutral) : The upper structure and arm are held in positio n and do not mov e.