Komatsu — WINDSHIELD

. OPERATION DETAILED CONTROLS AND GAUGES SUN ROOF WARNING lever is (A) located on front side, then push up and open the ceiling window grasping grip (B). equipped) or top guard (if equipped) WINDSHIELD WARNING door, REMARK 3 - 25 When leaving the operator's seat, set the lock lever securely to th position (L). If the lock lever (1) is in the FREE position (F) and the control lead to a serious accident. If touched by mistake, this may Opening . Set the lock lever (1) s ecurely to the LOCK position (L) . Check for any ceiling window movement by pulling loc REMARK When an overhead guard is installed, the sun roof d Closing Hold grip (B), lower the ce iling window, and apply lock (A).

If the lock cannot be applied, op en the ceiling window then pull it in again and ap ply the lock. When opening or closing the front window, bottom window, o 1) in the LOCK position (L). always set the lock lever ( If the control levers are n ot locked and they are touched by ac this may lead to a serious accident. When opening or closing the window at the front of the cab, s machine on horizontal gro und, lower the work equipment compl the ground, stop the engin When opening the front wi e, then carry out the operation.

ndow, hold the grip securely with both pull up, and do not let go until the automatic lock catch is locke When closing the front win dow, the window will move quicker u own weight. Hold the grip s securely with both hands when clos It i s possible to stow (pull up) the front window in the roof o f the operator's co With the single-pane front glass, the cab front window cann