Scania — Crankshaft damper

Engine Tier-3 710655- Ch 1 page 100 Crankshaft damper 1 1.Oscillation damper Crankshaft damper The power impulses from the connecting rause torsional oscillations in the crankshaft. These oscillations are severest at certain engine speeds which vary with the design of the engine, how it is loaded, etc. Torsional oscillation is characterised as follows: The flywheel (at the “rear” end of the crankshaft) rotates at an almost constant speed throughout each revolution of the crankshaft. In relation to the constant speed of the flywheel, the rotational speed of the front end of the crankshaft will increase and decrease several times during each rotation.

To reduce the amplitude of the oscillation, a crankshaft damper is attached to the front end of the crankshaft underneath a cover. A ring of steel is incorporated in the circular and completely enclosed housing of the crankshaft damper. The housing is bolted onto the crankshaft. There is a heavy oil between the housing and ring which damps the relative movement between the two. The oscillation at the front of the crankshaft is damped by the ring striving to rotate with even speed. 1 SHOP MANUAL MT26-31 - 06.2005