Scania — Lubrication system

Engine Tier-3 710655- Ch 1 page 145 Lubrication system Oil cleaner Permitted thickness of deposits on wall of cover . . . . . . . . . . . . . . . . . . . . max. 20 mm Oil pressure valve (Note: not safety valve) Oil pressure: Idle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 bar With warm engine running at 1000 rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 bar With warm engine running at 2,000 rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 - 6.0 bar Free spring length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

61.4 mm Oil filter Only use original MOXY filters. Tightening torques: Oil pump: Bolts for oil pump cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Nm Bolts, oil pump - cylinder block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Nm Oil cleaner: Lock nut for oil cleaner housing cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Nm Nut for rotor bowl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tightened by hand Rotor shaft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

34 Nm Oil nozzle for piston cooling: Banjo bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Nm Oil cooler: Bolts for oil cooler insert. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Nm SHOP MANUAL MT26-31 - 06.2005