Scania — Knocking noise

Engine Tier-3 710655- Ch 1 page 156 Fluid stroke Knocking noise Continue next page SHOP MANUAL MT26-31 - 06.2005 Effect Cause Troubleshooting Action Starter motor not pow­ erful enough to pull the piston over the com­ pression stroke (if the engine fires a connect­ ing rod could be bent) Leaky charge air cooler Test pressure (air 0.5 bar, liquid 4 bar) Leaky cylinder head gasket Crack in cylinder head If the fault is hard to trace: Change all cylinder heads for exchange cylinder heads. (Or test pressurize all cylinder heads.

Heat the cyl­ inder heads before pressurizing them.) Crack in cylinder liner Water has entered the engine via the exhaust/ intake system Crack in water-cooled exhaust manifold Injector open Effect Cause Troubleshooting Action Exhaust valves close too late and strike the piston crowns Timing gears incor­ rectly meshed Check the valve timing. The crankshaft gear has come loose Valve mechanism not operating Rapidly increasing valve clearances Disturbances in the sup­ply of lubricant for the rocker arms The piston strikes the cylinder head Loosened big end cap (wrong tightening torque after repair) Tighten to the torque specified in the Shop manual Foreign objects in the piston crown