Doosan Infracore D18NAP — P029B Injector Minimum drive pulse drift (Cylinder #1)

5. Failure Diagnosis P029B Injector Minimum drive pulse drift (Cylinder #1) 1. Overview 2. Condition for Running Diagnostic During engine running 3. Condition for Setting the Fault Code If the MDP (Minimum Driving Pulse) of cylinder #1 injector is out of the threshold during restricted condition, fault code is raised. 4. Condition for Clearing the Fault Code If the MDP (Minimum Driving Pulse) of cylinder #1 injector is within the threshold during restricted condition, fault code is cleared 5.

Inspection Items 5 - 88 Code Causes Impact P029B Connection problem Software problem CE lamp ON Low idle RPM increase NO ECU Pin Description 1 126 Fuel Injector LSD1A 2 127 Fuel Injector HSD1A Step Inspection Standard Value YES NO 1 P029B is occurred on diagnostic tool? Step 2 2 After let the machine is in safety area and turn-off the key switch. Step 3 3 Check if new software that solves this problem is available or if SW is up to date. Upgrade possible? Re flash SW Re Write I2C Step 4 4 Check that individual injector corrections (I2C) are correctly entered in ECU. Check particularly position and value Problem of I2C? Re Write I2C Step 5 5 Check accelerometer connection and screwing torque.

Mandatory: Check particularly ground shield connection of accelerometer Connection problem? Do necessary Call Hot line