5. Failure Diagnosis P0253 RPC error (IMV current trim drift low/high) 1. Overview 2. Condition for Running Diagnostic During engine running 3. Condition for Setting the Fault Code If the current of IMV trim value is out of the threshold, fault code is raised. 4. Condition for Clearing the Fault Code If the current of IMV trim value is within the threshold, fault code is cleared 5. Inspection Items 1) A 5 - 115 Code Causes Impact P0253 Faulty injector (sticking, coking, leaking etc), Injector wiring problem, Faulty IMV CE lamp ON Torque Reduction Lv0 NO ECU Pin Description 1 177 Inlet Metering Valve PWM 2 - Pbatt Step Inspection Standard Value YES NO 1 P0253 is occurred on diagnostic tool?
Step 2 O.K 2 After let the machine be in safety area and turn-off the key switch. Step 3 3 Please do visual inspection throughout all fuel line. (Low pressure circuit & high pressure circuit) Is there any leakage or blocking of fuel? If you cannot find with your eyes, You can check leakage during engine running in machine stationary condition. Step 4 Step 5 4 Please fix the leakage. After fix the problem, start the engine and change the RPM from low idle to high idle. Please keep the RPM as a high idle at least 10 minutes. Fault code is cleared? O.K Step 5 5 Please do the Shut off test & Run up test for detecting which injector has fault or not. Do you find faulty injector?
Step 6 Step 7 6 Change the injector which has a fault as a normal one. Start the engine and set the RPM in high idle at least 10 minutes. Fault code is cleared? O.K Step 7 7 Change the high pressure pump with DOOSAN A.S support. Fault code is cleared? O.K Call DOOSAN Hot line