9. Fuel System Fuel System General Information General Information operation, the ECU decides fuel amount, fuel injection timing, and pressure for optimum performance and injects fuel in the cylinder. A dies el engine is combusted by the compression heat generated by compressing air inhaled into the cylinder and the fuel injected by the fuel injection nozzle. The common rail fuel injection system consists of the low-pressure level for low-pressure fuel transfer, the high-pressure level for high-pressure fuel transfer, and the ECU. The high-pressured fuel generated by the high- pressure pump is stored in the common rail.
The timing and amount of fuel injection is calculated by the Electronic Control Unit (ECU). The ECU injects fuel by operating the solenoid valve for the injector installed in each cylinder. Doosan's common rail fuel injection system separates the high-pressure apparatus from the fuel injection apparatus. Depending on the conditions of engine The fuel tank should be anti-corrosive. No fuel should be leaked from the fuel tank under the doubled operating pressure of the fuel low-pressure pump. The pressure in the tank should not exceed 0.3 bar. 7 6 3 8 4 9 5 2 11 10 1 EDL013073A 1. Fuel Tank 5. Fuel injection pump 9. Injector 2. Fuel Filter 6. Common Rail 10. Fuel return hose 3. Fuel hose 7.
Fuel injection pipe 11. Return fuel hose of fuel injection pipe 4. VENTURI 8. Injector Fuel Return Hose 9 - 3