Doosan Infracore D18NAP — Connection of fuel return hose

9. Fuel System Fuel return hose General Information This hose is to transfer the fuel returned from the Connection of fuel return hose injector to the high-pressure pipe back. 1. Connect the fuel return hose. B Disconnection of fuel return hose 1. Remove the fuel return hose. A B C B A C B EDL013022A 1) Press the fuel return hose (A) into the end of the nipple and connect it. EDL013022A CAUTION Be careful to note the direction when connecting the fuel return hose. 1) Loosen the flange hex bolts (C). 2) Remove the hose clips and disconnect the fuel hose (A). The injector should be fully connected with the hose. 2) Attah the hose clips (B). Check of fuel return hose 1.

Check if there is any foreign substance or CAUTION damaged part in the inside and the outside of the fuel line. Fix the handle of hose clip to face the front of the engine. 2. Check if oil is leaked from the joints. 3) Tighten the fixing bolt (C). 3. Check if the adaptor is damaged and oil is leaked. 9 - 5