Doosan Infracore D18NAP — General Information

11. Cylinder block/head Cylinder block/head General Information General Information Doosan's diesel engine is an air-cooled electronic control diesel engine that uses cooling fans, overhead valve, and turbocharger. The high-pressure fuel generated from the fuel high- pressure pump is stored in the common rail. When a driver operates the vehicle, fuel injection timing and optimum fuel amount are decided based on the data set in the Electronic Control Unit ( ECU ) and the solenoid valve of the injector installed in each engine cylinder is operated to inject fuel into the cylinder. The cylinder block is made out of cast iron alloy and an anti-vibration and anti-noise crank case is mounted.

In addition, the cylinder block and the timing gear case are designed as an integral structure to reduce the engine length and improve tightness. The cylinder head is an integral structure, too. The forged crankshaft is an integral structure. The oil seals of the crankshaft and the flywheel prevents oil from permeating into the flywheel housing. The connecting rod is forged and its big end part vertically separated. Like a piston, the connecting rod can be disassembled through the upper side of the cylinder. The alloy-type prefabricated bearing is used for the active part of the crankshaft and the connecting rod. 11 - 3