Doosan Infracore D18NAP — Assembly of Timing Wheel

13. Others/Driving System Crankshaft Disassembly of Timing Wheel CAUTION 1. Remove the V-belt. Do not reuse the oil seal but replace them with new ones. 2. Remove the crankshaft pulley. 4. Remove the timing wheel. A A B EDL013033A 1) Loosen the flange hex bolt (B). EDL013038A 2) Remove the crankshaft pulley (A). 1) Remove the timing wheel (A). CAUTION Be careful not to damage the oil seal. Assembly of Timing Wheel 1. Attach the timing wheel. 3. Remove the timing gear case. A A B D E C EDL013038A EDL013037A 1) Attach the timing wheel (A). 1) Loosen the fixing bolt (D). 2) Remove the crank speed sensor (C). CAUTION 3) Loosen 16 hex bolts (B).

Be careful not to damage the teeth of the timing wheel. 4) Remove the timing gear case (A). 5) Remove the front oil seal(E) with the oil seal disassembly jig (850306-00078). 13 - 5