3. Performance and Specifications Engraving of main bearing bore level of Connecting rod engraving cylinder block The connecting rod weight is engraved in the position marked as A in the drawing and classified by a letter from A to F. These levels are necessary to order the connecting rod. The main bearing bore level of the cylinder block is engraved in the position marked as A in the drawing. The main bearing bore level of the cylinder block is classified as A, B, or C. These levels are necessary to order the suitable main bearing for the main bearing bore of cylinder block. A A EDL022217A EDL013063A Piston engraving The piston class is engraved on the position marked as A in the drawing.
The piston class is classified into A and B. These levels are necessary to check the suitable piston class. Crankshaft main journal engraving The crankshaft serial number is engraved at the position (A) in the drawing and the crankshaft main journal diameter class is engraved at the position (B) in the drawing. The crankshaft main journal diameter class is classified into A, B, and C. These levels are necessary to order the suitable main bearing. A A EDL022218B B EDL013064A 3 - 19