Doosan Infracore D18NAP — Replacement of Engine Oil

4. Regular Inspection Replenishment of Engine Oil CAUTION Be careful not to let foreign substances flow into the engine when removing the oil cap. CAUTION Be careful not to let foreign substances flow into the engine when replenishing engine oil. Exceeding the upper limit of the oil level gauge may cause engine faults. If you have exceeded the upper limit of the oil gauge, drain it until the engine oil level is indicated between the upper limit and the lower limit of the oil level gauge. 1. Remove the oil cap(A). 1 A Do not use unspecified engine oil additives. 3. Complete engine oil replenishment and cover the oil cap.

Replacement of Engine Oil Tightening Torque EDL013067A Oil capacity A 2 Engine oil capacity ( ℓ ) Engine Model Inside of the oil pan Total Note) Max. Min. D18NAP 6.3 2.8 6.7 EDL013068A 2. Add our recommended genuine oil to replenish the oil level. 1) Add our recommended genuine oil by dividing it 2) Wait for about 1 ~ 2 minutes and then check the into several portions for replenishment. engine oil level. 3) Check whether the oil is smeared between the upper limit and the lower limit of the oil level gauge. 4) Repeat the above process until the engine oil level reaches the appropriate level. 4 - 7 Component Drain plug Tightening Torque 3 kgf•m