Doosan Infracore D18NAP — Replacement of Air Filter Element

4. Regular Inspection 3. In an emergency, temporarily clean the element by using the following method. 1) Tab the end plate of the element with the thumb to clean it temporarily. CAUTION This method should only be used in an emergency when cleaning of element is necessary and no compressed air or cleansing solution is available. Under no circumstances should the surface of the element be hit or beaten with a hard object to shake the dust off. EDL022157A Note) Before reassembling the element, make sure that the filter paper is not wrinkled, the state of rubber sealing is good, and there is no deformed part in the element. Note) Under any circumstances, do not reuse damaged elements.

When in doubt, replace the element with a new one. Replacement of Air Filter Element CAUTION Do not let dust get inside the air filter end. 1. Remove the fixed parts. 2. Remove the damaged or contaminated element. 3. Thoroughly cleanse the contact surface of the sealing ring and the inside of the filter housing. 4. Assemble a new element. 5. Attach the fixed parts again. 4 - 16