Doosan Infracore D18NAP — Fault Code Items

5.

Failure Diagnosis 5 - 7 E-Code DTC Description CEL Torque 157-22 P0089 Rail Pressure Control fault (RPC using Rail Discharge) FLASH LV1 168-3 P0563 Battery voltage high fault ON LV0 168-4 P0562 Battery voltage low fault ON LV0 172-2 P0074 Inlet Air Temperature sensor gradient fault ON LV0 172-3 P0073 Inlet Air Temperature sensor high fault ON LV0 172-4 P0072 Inlet Air Temperature sensor low fault ON LV0 173-0 P2428 Exhaust over temperature fault ON LV0 174-2 P0181 Fuel temperature gradient fault ON LV0 174-3 P0183 Fuel temperature sensor high fault ON LV0 174-4 P0182 Fuel temperature sensor low fault ON LV0 175-2 P0196 Oil temperature plausibility fault 175-31 P0195 Oil temperature sensor signal fault ON LV0 629-12 P060B ADC circuit fault FLASH 630-11 P0602 C2I data not programmed ON LV1 630-23 P0603 ECU memory integrity fault (data / cal integrity) FLASH 630-24 P0604 ECU memory integrity fault (RAM integrity) FLASH 630-25 P0605 ECU memory integrity fault (code integrity) FLASH 630-31 P062F ECU non volatile memory fault FLASH LV1 636-0 P0371 Crank signal is too close to the previous one 636-1 P0339 CRANK signal fault (gap lost) ON LV0 636-2 P0372 Elapsed time between CPS events is too high ON LV0 636-8 P0374 Crank signal lost (no CPS signal seen in 1 cam rotation) ON LV0 636-11 P0335 Crank signal over speed fault ON 637-2 P0344 CAM signal fault (missing event within the window) ON LV0 637-8 P0342 Cam signal lost (no cam signal seen in 2 crank rotations) ON LV0 637-20 P0341 Cam signal drift higher than threshold 637-30 P0340 Cam signal last learnt value is outside of limits 639-19 U0100 CAN communication error:

CAN bus confirmed off ON 651-5 P0201 Injector Open Circuit fault (Cylinder #1) ON LV0 651-6 P02EE Injector Short Circuit fault (Cylinder #1) ON LV0 651-20 P0262 Wiring harness resistance high fault (Cylinder #1) 651-21 P0261 Wiring harness resistance low fault (Cylinder #1) 651-31 P029B Injector Minimum drive pulse drift (Cylinder #1) ON 652-5 P0202 Injector Open Circuit fault (Cylinder #2) ON LV0 652-6 P02EF Injector Short Circuit fault (Cylinder #2) ON LV0 652-20 P0265 Wiring harness resistance high fault (Cylinder #2) 652-21 P0264 Wiring harness resistance low fault (Cylinder #2) 652-31 P029F Injector Minimum drive pulse drift (Cylinder #2) ON 653-5 P0203 Injector Open Circuit fault (Cylinder #3) ON LV0