Doosan Infracore D18NAP — P0401 EGR control fault (airflow error too low)

5. Failure Diagnosis P0401 EGR control fault (airflow error too low) 1. Overview 2. Condition for Running Diagnostic During engine running 3. Condition for Setting the Fault Code Air mass difference between air flow meter and calculated air flow into the cylinder with EGR enable condition is out of the threshold, fault code is raised. 4. Condition for Clearing the Fault Code Air mass difference between air flow meter and calculated air flow into the cylinder with EGR enable condition is within the threshold, fault code is cleared. 5.

Inspection Items 5 - 12 Code Causes Impact P0401 EGR air path leakage, MAF sensor drift, damage of MAF sensor, Intake manifold pressure drift, Intake manifold temperature sensor drift CE lamp ON Torque Reduction Lv0 NO ECU Pin Description 1 193 EGR (H-Bridge Neg) 2 164 EGR, VREF3 3 - Not used 4 172 EGR Sensor Return GND 5 192 EGR (H-Bridge Pos) 6 116 EGR Position Sensor Signal Step Inspection Standard Value YES NO 1 P0401 is raised on diagnostic tool? 2 After let the machine be in safety area and turn-off the key switch. 3 Check the EGR pipe between exhaust manifold and EGR valve? Is there any leakage?

If you cannot find with your eyes, You can check leakage during engine running in machine stationary condition. 4 Check EGR pipe between EGR cooler and intake manifold. Is there any leakage? If you cannot find with your eyes, You can check leakage during engine running in machine stationary condition.