5. Failure Diagnosis P0524 Oil pressure remains low at engine run 1. Overview 2. Condition for Running Diagnostic After engine run 3. Condition for Setting the Fault Code After engine run, oil pressure sensor value is below the threshold value. 4. Condition for Clearing the Fault Code After engine run, oil pressure sensor value is within the normal range, fault is cleared. 5. Inspection Items 5 - 25 Code Causes Impact P0524 Oil pressure is below the threshold value in main gallery of engine cylinder block During engine running.
CE lamp Flashing Torque Reduction Lv1 Delay engine stop NO ECU Pin Description 1 148 Engine Oil Pressure & Temp Return GND 2 104 Engine Oil Temperature Sensor 3 165 VREF3, Engine Oil Pressure 4 111 Engine Oil Pressure Sensor Step Inspection Standard Value YES NO 1 P0524 is occurred on diagnostic tool? Step 2 2 After let the machine be in safety area and turn-off the key switch Step 3 3 Check the engine oil level in the oil pan. Oil level is within the specification? Step 4 Step 6 4 Check the engine oil leakage in oil path. Is there any leakage? Call Hot-line Step 5 5 Oil pump damage or oil filter blocked or oil path blocked or oil sensor drift can be suspected.
Call Hot-line 6 Refill the engine oil and start the engine. Keep low idle during 3minutes. The same fault code is happened from low idle to high idle? Step 4 Fault is cleared