. OPERATION OPERATION (G) Adjusting headrest angle Rotate the headrest to the front or rear. ADJUST SEAT BELT WARNING 3 - 78 (E) Seat height a Move lever (2) u as desired. Lever (2) is also used angle, so set the seat to the desired height while adjusting t he angle. Adjustment rang (F) Adjusting hea Move the headre st up or down to the desire Adjustment rang (H) Lumbar supp ort Turn grip (5) to a djust the tension applied to the lower back Before fastenin g the seat belt, check that there is no abnormality in the securing brackets or belt. If there is any wear or .
is any wear or damage, replace Even if there ap pears to be no abnormality in t he seat belt, replace t he sea t belt once e very 3 years. The date of manufacture is woven on the reverse side of the belt. to travel. belt twisted. Adjust and faste n the seatbelt before starting Always use the seatbelt when traveling. Do not use the s eat belt with either half of the in the securin Fastening and rem oving belt o that it is tight without being too tight. at, depress the brake pedal fully, and adjust the our back is pressed against the backrest. Fasten the belt s o that it is tight without bei 1. Sit on the se seat so that y 2. Sit in the sea (1) into buckl 3. When remov free the belt.
Fit the belt s 1. Sit on the se at, depress the brake ped our back is pressed again st the backrest. 2. Sit in the sea t, pull the right side of the b elt, then insert t ongue e (2) until a click is heard. 3. When remov button in buckle (2 ) to o that it follows your body a nd is not twiste