. OPERATION OPERATION speed will be 3 - 91 SHIFTING GEAR follows. omatic transmission, so set gear shift position, and the transmission will ition to match the travel speed. When shifting gear, do as This machine has an aut lever (1) to the desired automatically shift to a pos When the dump body is raised, if the shift lever is at the D position, the transmission is fixed in 2nd, and if it is at positions 1 - 5, the transmission is fixed in 1st. Keep the dump body lowered when traveling. travelin NOTICE n shifting between FORWARD and REVERSE, stop the machine Whe completely, and run the e ngine at low idling when shif ting the lever.
After moving the gear shif t lever, do not depress the ac celerator until you d etect that the transm ission clutch has engaged. Do n ot operate the gear shi ft lever with the accelerator pe dal depressed. This will cause a big shoc k, and will also reduce the ser vice life of the mach ine. SHIFTING UP 1. When accelerator ped machine, the lockup cl to direct drive. 2. If the machine is acc automatically shift up. al (2) is depressed to accelerate the 1. Wh ma to 2. If t aut . Wh chine, the lockup cl utch is engaged to shift the transmission direct drive. he machine is acc elerated further, the transmission will . If t omatically shift up.
SHIFTING DOWN If accelerator pedal (2) is released, the machine s If reduce d, and the transmis sion will automatically shift DOWN SHIFT INHIBIT If t he s hift lever is operate d when the machine is trav eling, and the travel speed is faster tha n the maximum speed fo r eac h gear position, the transmission is not shifted immediately but is shifted down when t he travel speed drops This pr events overrunning of the engine.