. OPERATION OPERATION DUMP OPERATIONS WARNING When dumping a load, always carry out the dumping operation in accordance with the signals from the flagman. the N position, and set parking brake 3 - 104 When dumping large rocks, Do not load the dump body When carrying out inspecti operate the dump body slowly. while it is still raised. on with the dump body raised, always use the safety pins, and set the dump lever to the HOLD position. N (PAGE 3-46)". For details, see "SAFETY PI Operate the dump body as 1. 1. Place shift lever (1) at switch (2) to the PARK 2. Move dump lever (3) to the RAISE position, then depress the accelerator pedal to rai se the dump body.
If the dump lever is rele ased when it is at the RAISE p osition, it is held at the RAISE p osition and the dump body will c ontinue to rise. The dumping speed i speed. ncreases in proportion to the engine 3. When the dump body ri ses to the previously set position , dump lever (3) returns to the HOLD position. The dump body is h eld at that position. If it is necessary to rais e the dump body further, operat e dump lever (3) to the RAISE position and the dump body will rise . If dump lever (3) is relea sed, dump lever (3) will r eturn to the HOLD position and the dump body will stop at that position .