Komatsu — PRECAUTIONS FOR OPERATION

. OPERATION OPERATION (1) in 3 - 107 WHEN USING TILT C (If equipped) 1. Remove pin (1) in th e mount at the rear of the cab, an t in h 2. A ppl y hydraulic pres sure 20.6 to 34.3 MPa (210 to 350 2 r , 298 0 to 4970 PSI) t o hose (4) behind the fr ont right wh aise the cab. 3. A fter tilting up, fixed the cab in position with lock bar (5 4. A h fter ole returning the c (2). PRECAUTIONS FOR OPERATION When traveling on roa ds in rain or snow, or wh en traveling on mud dy or soft ground, consid er the loaded condition of the machine and b e extremely careful not to let the tir es slip o r the machine spin and s ink into the ground.

If the e ngine should st op when the machine i s traveling, stop the machine immediately, th en move the gear shift lever t o the N position , and start the engine again. If the c entral warning lamp and pilot lamp for any EMERGENCY item on the machine mo nitor should flash and th e buzzer sounds du ring operation, stop the machine i mmediat ely and investigate the c Fo r details, see "TRO UBLESHOOTING (PA GE 3-122)" When loading, be car eful to load the dump b ody uniform ly, and b e particularly careful to a void loading too much at the front. O n slippery road surfa ces, apply the retarder control lev er slowly and shift the transmissio n down to prevent the wheel s from locking.